Type DID300B


  • TROX Active Chilled Beams type DID300B use a combination of air and water systems.
  • They combine the air flow characteristics of ceiling diffusers with the energy benefits of load dissipation using water (heating/cooling).
  • For raster ceiling system 300 mm.


The primary air volume flow required for fresh air supply enters the upper plenum box through a connecting spigot and is then discharged into the mixing zone via nozzles which are fitted into a diaphragm plate.

The induced air is drawn from the room through a water coil. In the mixing section of the DID300B the induced air is mixed with the primary air and the total discharged into the room via slots.

The DID300B can be used for cooling and/or heating. An additional spigot for extract of exhaust air can be fitted adjacent to the primary air duct (supply and extract air construction).

Downloads Group Type Ident-No. Type / Size
         
DID300B Induction Diffusers Technical Leaflet T 2.4/2/EN/1 PDF / 301 KB 
Project reference Telefonica Air Water Systems Project Information LWS 2002 PDF / 379 KB 

Reference

introductory_picture_small

Distrito de la Comunicación de Telefónica

More than 30,000 TROX chilled beams of DID300B type
Reference

Contact

trox_gebaeude_footer

TROX USA, Inc.

4305 Settingdown Circle
Cumming
Georgia 30028
Tel: +1-770-569-14 33

Contact and locations