Type DID-E


  • Type DID-E active chilled beams are installed into a formed plasterboard bulkhead.
  • There is a wide variety of options for configuration of the air inlet and discharge openings.
  • They are especially well suited for hotel bedrooms and individual offices.

TROX active chilled beams type DID-E discharge the air in one direction and use a combination of air and water systems for fresh air supply as well as room heating and cooling. They are particularly suitable for use in hotel bedrooms, individual hospital wards and cellular offices.

They combine the air flow characteristics of sidewall supply grilles with the energy benefits of load dissipation using water.

The required primary volume flow for fresh air is supplied through a duct into which nozzles are fitted. As a result secondary air is induced through a horizontal water coil for heating or cooling, or heating and cooling.

In the mixing section of the type DID-E the induced air is mixed with the primary air and the total discharged into the room via a TROX sidewall grille.

Downloads Group Type Ident-No. Type / Size
         
Multi-Service Chilled Beams (PDF - 530 KB) PDF / 527 KB 

Reference

introductory_picture_small

Distrito de la Comunicación de Telefónica

More than 30,000 TROX chilled beams of DID300B type
Reference

Contact

trox_gebaeude_footer

TROX USA, Inc.

4305 Settingdown Circle
Cumming
Georgia 30028
Tel: +1-770-569-14 33

Contact and locations